The Cisco Catalyst C9200-48P-E is an enterprise-level network switch offering exceptional performance and unmatched flexibility for modern network infrastructures. With its 48 Full PoE+ Gigabit Ethernet ports and 4 modular 10 Gbps SFP+ uplinks, this Layer 3 manageable switch meets the strictest requirements for connectivity, security, and scalability.

Perfect for businesses, university campuses, hospitals, or data centers, this Catalyst 9200 Series switch ensures optimal network management with a switching capacity of 176 Gbps and throughput up to 261.9 Mpps. Stackable architecture up to 160 Gbps for uncompromised scalability.

📸 Important Information: Photos are for illustration purposes only. Only the content of the listing is authoritative for the exact product reference and included accessories. If in doubt, please contact us before purchasing.

• IEEE 802.1D - Spanning Tree Protocol (STP)
• IEEE 802.1Q - VLAN Tagging
• IEEE 802.1p - Quality of Service (QoS)
• IEEE 802.1s - Multiple Spanning Tree Protocol (MSTP)
• IEEE 802.1w - Rapid Spanning Tree Protocol (RSTP)
• IEEE 802.1x - Network Authentication
• IEEE 802.3 - Ethernet
• IEEE 802.3at - Power over Ethernet Plus (PoE+)

• 🔄 Stacking StackWise-160 - Stacking up to 8 switches with 160 Gbps bandwidth
• 🛡️ Enhanced Security - AES-128 MACsec encryption, policy-based segmentation, Trustworthy Systems
• 📱 Simplified Management - Compatible with Cisco DNA Center, Software-Defined Access (SD-Access)
• ⚙️ Modular Uplinks - Flexible 1G/10G/25G/40G configuration according to your needs
• 🔧 Cold Patching - Maintenance without service interruption
• 💪 Redundancy - Support for redundant power supplies and fans for high availability
• 📶 Advanced QoS - Intelligent traffic prioritization with Jumbo Frames support
• 🔗 Link Aggregation - LACP support for link aggregation

🔹 Condition: Used - Tested and 100% functional

🔹 Reference: C9200-48P-E (Version V01)

🔹 Contents: Switch only (without power supply unit PSU)

⚠️ Important: This switch is sold WITHOUT PSU (Power Supply Unit). You will need to obtain a compatible power supply separately.

• 🏢 Enterprise networks – Modern office infrastructure with high-performance connectivity
• 🎓 University campuses – Centralized management of thousands of simultaneous users
• 🏥 Healthcare facilities – Maximum reliability for critical medical equipment
• 📹 IP video surveillance – PoE+ power for cameras and network recorders
• ☎️ VoIP telephony – Power and connectivity for Cisco and compatible IP phones
• 📶 WiFi access points – Deployment of WiFi 6 access points with PoE+ across the site
• 🏭 Industrial sites – Automation and IoT with enterprise-level security

• ✅ 30-day satisfaction or refund guarantee – Test with peace of mind
• 📦 Secure and fast shipping – Professional reinforced packaging with carrier tracking number
• 🧪 Thoroughly tested – Each device is checked by our certified technicians
• 🧾 Professional invoice – Paper invoice with 0% VAT included in every package
• 💯 Authentic Cisco equipment – Original manufacturer warranty, no counterfeits
• 🌍 Professional French seller – Responsive French-speaking customer service

⚠️ Disclaimer:

We do not provide any technical support regarding software configuration, firmware, or network integration of this equipment. The buyer is responsible for installation, configuration, and updating the network operating system (IOS). No Cisco DNA or Smart Net license is included with this used equipment.

1️⃣ Is the switch delivered with a power supply unit (PSU)?

No, this Catalyst C9200-48P-E switch is sold without a power supply unit (PSU). You will need to purchase a compatible Cisco power supply separately. Recommended models are the PWR-C5-1KWAC for a 1000W AC power supply with full PoE+ support, or the PWR-C5-600WAC for a 600W version. Make sure to choose a power supply that fits your PoE power needs.

2️⃣ What is the total PoE power available on this model?

The C9200-48P-E supports Full PoE+ (IEEE 802.3at) on all 48 ports with a power of 30W per port. The total PoE budget depends on the installed power supply: up to 740W with the PWR-C5-1KWAC, allowing simultaneous powering of dozens of IP cameras, VoIP phones, WiFi 6 access points, access controllers, and other power-hungry network devices.

3️⃣ Can multiple C9200 switches be stacked together?

Absolutely! The Catalyst 9200 Series uses StackWise-160 technology allowing stacking of up to 8 switches with a 160 Gbps stacking bandwidth. This stackable architecture offers unified management, hardware redundancy, and exceptional scalability for growing networks. Stacked switches behave as a single logical unit with a unique management IP address.

4️⃣ What uplink options are available on this switch?

The C9200-48P-E features 4 modular 10 Gigabit SFP+ uplink ports in standard configuration. These uplinks provide high-speed connections to your core network infrastructure, NAS, servers, or aggregation switches. You can use 10GBASE-SR SFP+ transceivers for multimode fiber, 10GBASE-LR for long-distance single-mode fiber, or DAC (Direct Attach Copper) cables for cost-effective short-distance connections.

5️⃣ Does this switch support Layer 3 routing and VLANs?

Yes, the Catalyst C9200-48P-E is a fully manageable Layer 3 switch with the Network Essentials license. It supports inter-VLAN routing, dynamic routing protocols (OSPF, EIGRP, BGP depending on license), up to 4096 IEEE 802.1Q VLANs, advanced Quality of Service (QoS), Access Control Lists (ACLs), and many enterprise network security features. Ideal for segmenting your network into secure logical zones and optimizing each department’s performance.

6️⃣ Is the switch compatible with non-Cisco network equipment?

Absolutely! Although designed to integrate ideally within a Cisco ecosystem, the C9200-48P-E complies with all open IEEE standards (802.3, 802.1Q, 802.1x, 802.3at, etc.) ensuring full interoperability with multi-brand equipment: Dell/HP servers, UniFi/Aruba access points, Axis/Hikvision cameras, Polycom/Yealink IP phones, Synology/QNAP NAS. The LLDP protocol enables automatic discovery of connected devices.

7️⃣ What are the built-in security features?

The Catalyst 9200 offers enterprise-grade security with AES-128 MACsec encryption to protect data in transit, 802.1X authentication to control network access, policy-based segmentation (Group-Based Policy), protection against DDoS and spoofing attacks, DHCP snooping, Dynamic ARP Inspection, IP Source Guard, Private VLAN, and Cisco TrustSec for advanced micro-segmentation. Perfect for sensitive environments (healthcare, finance, government).