🌐 Cisco Supervisor Module Ws-X45-Sup7-E Catalyst 4500E 848 Gbps 🌐

✅ Supported Chassis

💡 Important: The 4507R+E and 4510R+E chassis support redundant supervisor configuration (1+1) for maximum high availability with automatic NSF/SSO failover.

🔍 Product Condition

This Cisco WS-X45-SUP7-E supervisor module is sold as tested and fully functional used equipment. The device has been carefully inspected by our technicians and is ready to use immediately after installation in a compatible Catalyst 4500E chassis. The hardware shows normal signs of professional use but guarantees optimal performance for your network infrastructure needs.

📋 Delivery Contents

✅ Cisco WS-X45-SUP7-E Supervisor Module

Note: SFP/SFP+ modules, network cables, chassis, and other components are not included. The module requires a compatible Catalyst 4500E chassis and appropriate Cisco IOS XE (minimum recommended version 3.1.0 SG).

🔧 Required Configuration: This supervisor requires a compatible Catalyst 4500E Series chassis and an appropriate version of Cisco IOS XE. Check hardware and software compatibility before purchase if you plan to integrate it into an existing infrastructure.

💻 Technical Support: We do not provide technical support for configuration, installation, or troubleshooting of this Cisco supervisor. The buyer must have the necessary network skills or hire a certified Cisco integrator. Configuration requires command-line interface (CLI) access and mastery of Cisco IOS XE.

📜 Software Licenses: This module is sold without a Cisco IOS XE software license. You must have a valid license or obtain one from Cisco or an authorized reseller. Some advanced features (IP Services, Security, etc.) require additional specific licenses.

🔧 Professional Equipment: This supervisor is enterprise-level professional network equipment requiring appropriate technical expertise. It is not intended for home use. Ensure compatibility with your chassis and infrastructure before purchase.

🔌 Which chassis are compatible with this supervisor?

The WS-X45-SUP7-E is compatible with all Catalyst 4500E Series chassis: 4503-E (3 slots), 4506-E (6 slots), 4507R-E and 4507R+E (7 slots), 4510R-E and 4510R+E (10 slots). Models with "R" support supervisor redundancy. Note: this module is not compatible with older 4500 Classic (non-E) chassis. Please ensure you have an E-Series chassis before purchasing.

📊 What is the difference with the SUP6-E or SUP8-E?

The SUP7-E offers 848 Gbps compared to 848 Gbps for the SUP8-E but less than the SUP9-E (1.44 Tbps). Its main innovation compared to the SUP6-E is support for 48 Gbps per slot (vs 40 Gbps) and native integration of Flexible NetFlow. The SUP7-E remains an excellent choice for campus and aggregation environments with an optimal performance/price ratio, especially second-hand to modernize an existing infrastructure without changing the chassis.

🔄 Can I configure two SUP7-E units in redundancy?

Yes, absolutely! The 4507R+E, 4507R-E, 4510R+E, and 4510R-E chassis support 1+1 configuration with two identical supervisors. The primary supervisor manages all operations while the secondary remains on standby. In case of primary failure, NSF/SSO (Nonstop Forwarding / Stateful Switchover) failover occurs transparently within seconds without session loss, ensuring maximum availability for your critical applications.

🌐 How many ports can a switch support with this supervisor?

The SUP7-E can handle up to 384 Gigabit Ethernet 10/100/1000 ports, 196 Gigabit SFP ports, or 100 10 Gigabit Ethernet ports (including the supervisor’s 4 uplinks), depending on the line cards installed in the chassis. The exact capacity depends on the chassis configuration (number of available slots) and chosen line card modules. All ports benefit from a non-blocking bandwidth of 48 Gbps per slot.

⚡ Are PoE and UPOE natively supported?

Yes, the SUP7-E fully supports PoE+ (802.3at, 30W) and UPOE (60W) on all compatible line cards simultaneously, provided the chassis has sufficient power supplies. The chassis must be equipped with appropriate PoE power supplies (e.g., 6000W or 9000W power supplies depending on the chassis model). The supervisor intelligently manages power distribution and prioritization in case of high consumption.

💾 Which IOS version should be used?

The SUP7-E requires Cisco IOS XE version 3.1.0 SG minimum. To benefit from all features and security patches, we recommend using the latest stable version available in the IOS XE 3.x SG branch. Newer versions bring performance improvements, new features, and bug fixes. Check the Cisco compatibility matrix and download the appropriate IOS via your Cisco CCO account if you have a support contract.

🔧 Is it possible to upgrade the RAM?

Yes, the SUP7-E comes with 2 GB of SDRAM but supports a memory upgrade to improve performance with large routing tables or complex configurations. Increasing the RAM allows managing larger deployments with more VLANs, routes, ACLs, and active features simultaneously. Check Cisco documentation for exact compatible memory module specifications and installation procedures.